Fail-safe audio playback prep for opening night.
Structured QLab workspaces, redundant Dante network patch matrices, and calibrated gain staging eliminate bottlenecks before actors walk onto tech rehearsal in Portland. Zero clipping, zero buffer overruns, and zero dead air.
Route.
Stems leave our studio formatted for QLab, Dante virtual soundcards, or analog line feeds with zero headroom guessing. The single most catastrophic point of failure in live theatre sound is an ad-hoc playback system patched together thirty minutes before curtain. Cable buzz, misassigned Dante IP addresses, and rogue system alerts have broken productions far more frequently than missed rehearsal lines.
Channel plots, patch lists, and Dante Controller routing grids map every input and output explicitly. Whether feeding twenty channels of vocal lavaliers through a digital mixing desk or distributing surround effects through balcony speakers, these documents allow your venue technicians to verify lines in seconds.
Script.
Show files are built in QLab 5 Pro with bulletproof stability. Cues are arranged into nested target groups with strict auto-follow logic, pre-wait offsets, and OSC network triggers. Stage managers do not need to guess whether a transition cue will cut off an underscoring bed; automated crossfade ramps feature logarithmic taper curves so transitions sound musical and natural.
Every cue is color-coded by department: green for ambient background beds, amber for targeted spot foley effects, and violet for cast mic unmutes. If an actor cuts four lines of dialogue in scene three, emergency skip cues and panic duckers are pre-programmed into the workspace to restore silence immediately with a single keystroke.
Calibrate.
Ten hours of rehearsal playback fail if the sub-bass profile masks the female lead’s formant range. We calibrate audio levels and frequency trims specifically against your theater venue’s acoustic response. A vocal cue that clips at the desk destroys dramatic tension faster than a forgotten line.
Before handing files over to your company, we run simulated dry runs through our GLM-calibrated Genelec 8340A monitoring environment with SAM subwoofers. We test buffer stability under high-demand multi-stem playback so that QLab never drops audio samples when eight audio layers fire simultaneously.
Price.
Technical show preparation is billed at $50–$199 USD per hour. The exact hourly investment depends on the complexity of your system: simple stereo audio cue consolidation and fade programming sits at the lower end, while multi-node Dante networking, OSC automation scripting, and wireless microphone gain structure alignment sit at the upper end.
| Prep Tier | Rate Basis | Duration | System Scope |
|---|---|---|---|
| Workspace Assembly Audio cue consolidation & clean-up |
$50–$85 / hr | 4–8 hours | Stereo QLab 5 workspace, auto-fade grouping, rehearsal playback guide |
| Show Programming Advanced QLab scripting & fades |
$85–$140 / hr | 8–16 hours | Multi-channel routing, OSC commands, emergency panic macros |
| Network & Redundancy Rig Dante IP setup & venue failover |
$140–$199 / hr | 12–24 hours | Dante patch routing, primary/secondary Mac lock, stage-box line test |
Proof of Practice: Lead audio engineer Anna Petrova brings rigorous technical methodology to theatrical sound prep since 2021, verified by registered Oregon business status and 18 completed stage productions per season throughout the Pacific Northwest.
Who this is not for: We do not wire DJ rigs, provide pub karaoke systems, or supply unlicensed consumer software hacks. We deliver enterprise-grade, standard-compliant QLab and Dante production workspaces ready for professional stagehands.