Theatrical sound studio in Portland.

Sound designer Anna Petrova provides theatrical audio mixing, sound design, and technical show preparation in Portland for stage directors, playwrights, and live performance companies with calibrated studio monitoring and analog consoles.

Hourly Mixing Rate $50–$199 / hr
Day Session Lockout $650–$1,000 / day
Lead Engineer Anna Petrova (Since 2021)
Portland Practice 18 Productions / Season
Owen Meadow studio control room with mixing console and acoustic treatment in Portland
Treated control room · Northwest Irving Street GLM Calibrated

Route.

Every production comes with strict acoustic constraints. We do not tune rooms by ear alone; we measure Schroeder frequencies and rig delay matrices before rehearsal one. Below is our complete production roster for Oregon theater companies, independent directors, and dramatists.

Select a service to review hardware routing, delivery turnarounds, and hourly billing structures. We handle both continuous seasonal sound design contracts and emergency technical prep sessions 48 hours before opening night.

Acoustic Standards AES-12id · Dante AES67
Session Capacity Up to 16 Discrete Channels
Turnaround Protocol 24h Emergency Dress Revisions
Facility Dispatch 1201 NW Irving St, Portland

Craft.

Theatrical audio is physical. A vocal cue that clips at the desk destroys dramatic tension faster than a forgotten line. We capture custom foley against reclaimed Douglas fir, solder balanced patch cords for venue stage boxes, and mark every cue against a printed prompt book before touching software automation.

Ten hours of rehearsal playback fail if the sub-bass profile masks the female lead’s formant range. We calibrate each stem against the real physical boundary of your stage.

Acoustic Treatment Quadratic Timber Diffusers
Signal Patching Mogami 2932 Multi-core Dante
Reference Standard AES-12id Live Reinforcement

Estimate.

Sound budgets cannot depend on guesswork. Theatrical work prices strictly by published rate bands: mixing, sound design, and technical prep bill between $50 and $199 per hour depending on track complexity; studio shifts with engineer Anna Petrova run $75 to $85 per hour; full-day lockout shifts run $650 to $1,000 per day.

Use this calculator to determine a non-binding budget range. Formula: Baseline = (Rate × Units) × Revisions + Engineer Add-on.

Live Scope Estimator

Adjust project duration, scope of works, and revision requirements to project your production allocation. Final quotes require script review and room specification.

Projected Budget Range
$580 – $1,830

Includes primary stem isolation, delivery in 24-bit 48kHz WAV, and QLab cue structure.

Rate Structure $50–$199 / hr
Billed Duration 8 units
Revision Multiplier 1.0x
This figure is a preliminary estimate and does not constitute a binding legal quote. Final project contracts depend on track count, rehearsal turnaround schedules, and venue console integration.
Four-Stage Protocol

Execute.

Stems leave our studio formatted for QLab, Dante virtual soundcards, or analog line feeds with zero headroom guessing. We work to an exacting four-stage protocol to prevent opening night failures.

From script notation to multi-channel dress rehearsal dry-runs, every decibel is accounted for before actors step onto the raked deck.

Review Studio Hardware

Script Analysis & Room Mapping

STEP 01

Cue timings, dialogue lines, acoustic transitions, and dynamic peaks are charted directly against your rehearsal draft. Venue speaker layout schematics and reverberation calculations inform the acoustic setup for your performance hall.

Input Prompt Book & Vectorworks Cad
Analysis Schroeder RT60 & SPL Ceiling

Source Capture & Foley Synthesis

STEP 02

Tactile props, environmental ambiences, and cast dialogue are recorded in our treated Portland tracking room. We run Neumann U87 Ai, Sennheiser MKH 416, and AKG C414 microphones through pristine Universal Audio Apollo and Merging Anubis preamplifiers.

Hardware Neumann U87 · Anubis Dante
Format 32-Bit Float / 96kHz Master

Multitrack Stem Summing & EQ Notch

STEP 03

Dialogue tracks undergo surgical frequency separation via iZotope RX 10 and FabFilter Pro-Q3. We carve out harsh stage room modes and ring frequencies, ensuring lavalier mics sit cleanly above explosive underscoring.

Processing Empirical Labs Distressor Pair
Monitoring Genelec 8340A SAM + 7370A Sub

QLab Integration & Tech Rehearsal Dry Run

STEP 04

Cues are delivered fully programmed into a validated QLab 5 Pro bundle with pre-configured fade matrices, emergency panic hotkeys, and redundant Dante channel assignments. We test the workspace in real-time before cast dress rehearsal.

Delivery QLab 5 Workspace · 24-bit 48k Stems
Redundancy Primary/Secondary Dante Patches

Compare.

Theatrical productions select audio partners based on hourly rates, day lockout terms, engineer presence, revision turnaround, and delivery reliability. We present our figures openly without obscured facility charges or hidden cable fees.

Service Category Billing Basis Typical Shift In-House Engineer Included Revisions
Theatrical Audio Mixing $50–$199 / hr 5 h or 9 h Anna Petrova 1 full revision pass
Theatrical Sound Design $50–$199 / hr 5 h to 10 h Anna Petrova 1 tech dress adjustment
Technical Show Prep $50–$199 / hr 5 h Anna Petrova Live QLab validation
Studio Session with Engineer $75–$85 / hr 5 h minimum Included ($75–$85/hr) Real-time tracking takes
Package Day Session $650–$1,000 / day 9 h or 10 h lockout Included full shift Same-day mixing iterations

What our quote depends on: scope of works; revision count; number of engineers required; shift duration (standard shifts run 5 hours, 9 hours, or 10 hours); whether an in-house engineer is requested; and whether your company books hourly or an all-inclusive day package.

Console engineering rates sit at $75 to $85 per hour with Anna Petrova; revisions outside the contracted pass cost the same rate. Full production lockouts run 9 to 10 hours at $650 to $1,000 per day including interface patching and monitor calibration.

Filter.

Owen Meadow is not a pop music demo tracking suite or an algorithmic voice-over factory. We specialize entirely in theatrical stage dynamics, cast acoustics, and live console playback.

Commercial jingle mastering, streaming-only beats, or projects demanding unmetered compression that destroys actor vocal intelligibility are refused. Speculative royalty shares are not accepted; every production is billed on our clear hourly or day rates.

If your theatre company values room calibration, dynamic clarity between whisper and roar, and fail-safe QLab delivery, our studio is engineered for your timeline.

Commit.

Technical specifications, script excerpts, and venue audio sheets receive evaluation within one business day. Fill out the production inquiry below, or contact Anna Petrova directly at [email protected] or +1 (507) 555-2568.

Please state your name or theatrical company.
Please enter a valid production email address.
Please provide a valid phone number with area code.
You must confirm your consent for us to process your production specifications.